The FTE-1300 combines an electromagnetic flow sensor, PT100 temperature sensor, polysilicon pressure sensor and converter in a compact housing. It measures volumetric flow, temperature and pressure of liquids with conductivity above 2 µS/cm. Depending on the process connection, it can be configured for a range of industrial and hygienic installations.
An ARM Cortex-M4 32-bit processor, 24-bit ADC and adaptive variable-frequency excitation support stable measurement. Local commissioning can use an infrared controller or Bluetooth mobile app. Self-diagnostics cover empty pipe, excitation circuit faults and flow alarms. The PEEK liner and electrodes are formed as an integrated assembly.
| Nominal diameter | DN6–DN65 |
|---|---|
| Suitable media | Conductive liquids including salt solutions, slurry, mineral pulp and paper pulp; conductivity ≥ 2 µS/cm |
| Standards | JB/T 9248 electromagnetic flow sensors; JJG 1033 electromagnetic flowmeter verification |
| Liner | PEEK |
| Pressure | −0.1 to 4.0 MPa without pressure sensor |
| Electrode materials | Hastelloy C or 316L |
| Body materials | 304 or 316L stainless steel |
| Process connections | Thread, clamp or flange; other connections on request |
| Measurement accuracy | Flow ±0.5%; temperature ±0.5 °C; pressure ±8 kPa |
| Pressure/temperature ranges | 0–1.6 MPa and −40 to 120 °C; configurable |
| Analog output | 4–20 mA |
| Communication | IO-Link and RS485 (Modbus RTU) |
| Turndown | 150:1 |
| Power supply | 18–36 V DC |
| Electrical connection | M12 4-pin connector |
| Power consumption | < 5 W |
| Ambient temperature | −25 to 75 °C |
| Medium temperature | Standard: −40 to 90 °C; high-temperature version: −40 to 125 °C |
| Protection grade | IP67 |

Tell us about your measurement task and we will help with product selection and technical questions.info@doweston.com