The FTUM-3000 is a clamp-on ultrasonic flowmeter for industrial liquid pipelines. It calculates flow velocity from the difference between upstream and downstream ultrasonic transit times, then determines volumetric flow from pipe cross-sectional area.
Sensors are fixed to the outside of the pipe without direct contact with the medium. Subject to site safety and installation requirements, this supports flow checks, operating verification and temporary monitoring without cutting the pipe or stopping the process.
| Measurement principle | Clamp-on ultrasonic transit time |
|---|---|
| Media | Liquids |
| Accuracy / repeatability | ±1.0% / ±0.3% |
| Nominal pipe diameter | DN50–DN1200 |
| Velocity range | 0.49–12 m/s (1.6–40 ft/s) |
| Ambient temperature | −10 to 50 °C |
| Operating temperature | 0–60 °C |
| Power supply | 10–36 V DC |
| Display | Backlit 20×2 character LCD |
| Local control | 16-key keypad, including 12 dual-function keys |
| Sensor protection | IP68 |
| Transmitter protection | NEMA 4X / IP65 |
| Ambient humidity | Up to 99% RH, non-condensing |
| Current output | 4–20 mA; maximum load 750 Ω |
| Pulse / frequency output | Open collector; 0–9999 Hz, configurable limits |
| Relay | SPST; maximum switching frequency 1 Hz |
| Contact rating | 125 V AC / 0.3 A or 30 V DC / 1 A |
| Digital interface | RS485 / Modbus RTU |
| Totals | Daily, monthly and yearly cumulative flow |
| Transmitter dimensions | 149.86 × 149.86 × 68.58 mm |

Tell us about your measurement task and we will help with product selection and technical questions.info@doweston.com