Submersible Level TransmitterBased on the principle that the measured liquid static pressure is proportional to the height of the liquid, this product is mainly made of advanced isolated diffused silicon sensitive elements or ceramic capacitive pressure sensitive sensors. Let me introduce the product of the input liquid level meter?

When used, the input liquid level gauge can convert the static pressure into an electrical signal, and then convert it into a standard electrical signal (generally 4~20mA/1~5VDC) through temperature compensation and linear correction to measure the liquid level pressure. Of course, it can also be called "static pressure level gauge, liquid level transmitter, liquid level sensor, water level sensor". Submersible level gauges are made of advanced isolated diffused silicon sensing elements. It can be placed directly into a container or body of water to accurately measure the height from the end of the water level meter to the water surface. When in use, the water level value passes through 4-20mA current. Or RS485 signal external output. Its structure is that this two-wire submersible level meter consists of a special gas cable with built-in capillary tube, a pressure-resistant connector and a probe. The probe structure of the submersible level gauge is a stainless steel barrel with a diaphragm at the bottom and covered by a perforated plastic shell. The measurement of the input liquid level meter is actually the difference between the static pressure of the liquid on the probe and the actual atmospheric pressure, and then the pressure difference is converted into a 4-20mA output signal and electronic components through a ceramic sensor (attached to a stainless steel membrane).

Injection-type liquid level gauges are now suitable for liquid level measurement of various media in systems and industries such as petrochemical, metallurgy, electric power, pharmaceuticals, water supply and drainage, and environmental protection. The structure is exquisite, the adjustment is simple, and the installation is flexible, making it easy for users to use. Users can choose standard signal output modes such as 4~20mA, 0~5v, 0~10mA according to their needs. Generally speaking, this stainless steel sensor of a submersible level gauge has a retractable polyurethane housing material cable. Submersible level gauges are available with sensors with heavy anchors. Submersible level gauges are used in liquid environments with fluctuating or fast currents. Moreover, it is characterized by good stability and high precision. Of course, it can also be placed directly into the medium being measured, making it very convenient to install and use. Solid structure, no moving parts, high reliability and long service life. High-precision measurement from water, oil to high viscosity paste, not affected by bubbling, sedimentation, electrical properties of the measured medium. Wide range temperature compensation. It also has power reverse polarity protection and overload current limiting protection. This is a regular manufacturer. Friends who want to order this product may wish to choose here. I believe you will not be disappointed. The prices here are reasonable and the quality is guaranteed. There are also many types of products, so there is always one that is right for you. Welcome everyone to come and buy.

The content of the above article is an introduction to the products of the input liquid level meter for our friends. If you see a friend, you can read it carefully. Of course, there is a lot of information about input level gauges. We will continue to update in the future. If you still don't understand anything, you can come to us for consultation at any time. New and old customers are welcome to come to our company for inspection and then choose the equipment that suits them.