The input liquid level gauge is based on the principle that hydrostatic pressure is proportional to the height of the liquid to measure the height change of the liquid level. Good cost performance, high precision and good stability. It has a wide range of use and is suitable for various liquid media with low impurities. It has wide applicability. The following is a brief introduction to the use and installation precautions of the submersible liquid level meter.

1. Basic points for using input liquid level gauge:

1. During transportation, the input liquid level gauge should ensure that its original packaging is complete and firm, and should be stored in a cool, dry, and ventilated warehouse.

2. If any abnormality is found during the use of the submersible liquid level gauge, the power should be turned off immediately, the work should be stopped, and trouble-free methods should be adopted for inspection and maintenance to ensure that it is put into use again.

3. When connecting to an external power supply, the submersible level gauge should be operated in strict accordance with the wiring instructions.

2. Installation of input liquid level gauge:

1. Flange installation: The through hole in the middle of the flange is screwed together with the instrument and installed on the matching flange of the container. It is suitable for covered containers.

2. Bracket installation: The bracket is installed on the side wall or top, and the instrument is fixed on the container or pool through the bracket. It is suitable for open containers or pools.

3. How to solve the interference problem of liquid level gauge?

Although the liquid level gauge has the characteristics of good stability, high precision, and easy installation and use. However, it will inevitably be interfered by many external factors during use. In order to avoid the influence of downward flowing liquid on the submersible liquid level meter, causing deviations in the measured volume of the submersible liquid level gauge, we must pay attention to:

1. Other objects can be used to slightly block the instantaneous direct impact of the liquid;

2. Or use another way to break it into parts, that is, turn the water inlet into a shower type, and turn the large flow of water into a small flow of water.

3. Another method is to bend the water inlet pipe upward. When the water flows out, it goes up first and then down, which reduces the impact force and effectively reduces interference.

In general, the input level meter is an intuitive primary metering instrument. It has the advantages of rigorous internal structure design, beautiful appearance, and convenient maintenance and installation. Input-type liquid level gauges are widely used in various transparent liquid storage tanks and boilers in petroleum, chemical, metallurgy, electric power, pharmaceuticals, papermaking and other industries, such as oil, liquefied gas, chemical raw materials and other medium storage tanks. The input liquid level gauge is installed on various liquid storage tanks and boilers, through which changes in the liquid in the container can be visually observed. The liquid part displays green, and the non-liquid part displays red, which changes automatically and continuously as the liquid level rises and falls. The submersible level gauge is a very good product.

We are a manufacturer of input liquid level gauges. If you want to know more about them, you can contact us. We can introduce it to you from different aspects so that you can have a more detailed understanding.