Coriolis Mass Flow Meter Installation Instructions

1. Overview

The Doweston Coriolis mass flow meter is an instrument based on the Coriolis effect that can directly measure fluid mass flow. In order to ensure its high accuracy, stability and reliability, correct installation is crucial. This article will provide you with comprehensive installation instructions for the Doweston Coriolis Mass Flow Meter.

2. Preparation before installation

According to the usage scenario and flow requirements, select the appropriate model and specification of Doweston Coriolis mass flow meter.

Read and understand the product manual of the Doweston Coriolis mass flow meter to understand the product's performance parameters, installation requirements and operating precautions.

Ensure that the on-site installation environment meets the environmental requirements of the instrument and avoid unfavorable factors such as high temperature, high humidity, and high magnetic field.

Prepare installation tools, such as wrenches, screwdrivers, pumps, levels, etc.

Check the appearance of the meter and accessories to make sure they are not damaged or missing.

3. Installation steps

Installation location selection: Choose a location that is convenient for installation and maintenance to avoid the direct impact of fluid interference components such as elbows and valves. Ensure that the installation location meets the temperature, pressure and other environmental requirements of the instrument.

Installation orientation: Doweston Coriolis mass flow meters can be installed vertically, horizontally or tilted. Choose the appropriate installation direction according to site conditions. Ensure that the measuring tube is arranged horizontally or vertically to avoid additional stress on the measuring tube.

Installation process:

A. Clean the pipes: Before installation, clean the impurities and dirt in the pipes to avoid damage to the instrument.

B. Install the flange: Connect the flange to the pipe and ensure the tightness of the flange connection to prevent leakage.

C. Place the Doweston Coriolis mass flow meter in the appropriate location and connect it to the pipe. Use bolts and nuts to secure the flange and avoid over-tightening.

D. Depending on the site environment, install a protective cover or insulation layer (if necessary).

Electrical connection: Correctly connect the power cord, signal wire and ground wire according to the requirements of the product manual. Make sure electrical connections are tight and waterproof.

Check the installation: Check whether the installation is correct, firm and leak-free. Check whether the electrical connection is reliable and there are no false connections.

4. Startup and debugging

Before starting up the Doweston Coriolis Mass Flow Meter, make sure the piping system is in place and all valves and fittings are installed correctly.

Gradually open the inlet and outlet valves so that the fluid slowly fills the measuring tube and evacuates the gas in the measuring tube. Avoid opening the valve suddenly, which may cause shock pressure and damage the instrument.

Turn on the power and start the instrument, and check the working status of the display screen, indicator lights, etc. If there is any abnormality, please cut off the power immediately and check.

Use the steps provided in the product manual to perform initial setup and parameter adjustments on the Doweston Coriolis Mass Flow Meter. If you need to further optimize performance, you can adjust parameters according to actual application scenarios.

When using or replacing the measuring fluid for the first time, it is recommended to perform zero point calibration and full scale calibration. During the calibration process, please ensure stable fluid flow to avoid measurement errors.

5. Operation and maintenance

During use, check the working status of the instrument regularly. If any abnormality is found, please deal with it in time.

For fluids containing solid particles or prone to scaling, it is recommended to clean the measuring tube regularly to maintain the measurement accuracy of the meter.

Follow the recommendations in the product manual and perform regular maintenance and upkeep on the instrument, such as replacement of worn parts, lubrication, cleaning, etc.

During shutdown or prolonged outage, close the valve and disconnect the power supply. If necessary, the instrument can be disassembled and cleaned and maintained.

For sites with poor external environment, it is recommended to add protective measures, such as protective covers, heat insulation layers, etc., to extend the service life of the instrument.

6. Precautions

Do not install or operate the product without reading the Doweston product manual.

Please ensure that the electrical connections are correct to avoid power short circuit or electric shock accidents.

During installation, commissioning and maintenance, please follow safe operating procedures, such as wearing labor protection equipment and avoiding operating on slippery floors.

If you encounter instrument failure or unresolved problems, please contact Doweston customer service or professional technicians for processing.

Through the detailed introduction in this article, I hope you can correctly install and use the Doweston Coriolis mass flow meter. If you have any questions or concerns, please feel free to contact the manufacturer or technical support team, we will wholeheartedly provide you with professional technical support and services.

Doweston Coriolis mass flow meters are widely used in various industrial fields, such as petroleum, chemical industry, pharmaceuticals, food processing, etc. Correct installation and operation of the instrument is key to ensuring its high performance, high reliability and long life. Please be sure to follow the recommendations and requirements of this installation manual to ensure that the instrument can achieve maximum effectiveness in your production process.

If you encounter problems during use, please contact Doweston in time, and we will provide you with comprehensive technical support and solutions. At the same time, we also welcome your valuable feedback and suggestions to help us continuously optimize product performance and service quality.

In the future production and application process, we hope that the Doweston Coriolis mass flow meter can provide you with accurate and reliable flow measurement and help your business continue to develop and grow. Thank you again for choosing our products and wish you a successful project and a prosperous business.