What should you pay attention to when using a turbine flow meter?

Turbine flow meters are one of the most popular devices in all existing industries because most companies use them in their production.

This kind of equipment has very low requirements on the surrounding environment and the accuracy of its own instrument.

If care is not taken, many operators may be in danger while operating.

What should you pay attention to when using turbine flow meter? Let's see.

(1) When using a turbine flow meter, carefully select the installation location of the equipment and consider the surrounding installation locations. These factors are very critical, because the equipment itself is some optical electronic equipment, so when installing, you must avoid using powerful equipment and relatively low-frequency equipment, and usually avoid inappropriate magnetic fields, which may cause danger to people.

Turbine flow meter should not be placed in strong alkali, alkaline or related environments to avoid corrosive damage to the entire equipment and to avoid leakage due to this situation. It is best to choose a place where the installation location is small or open so that everyone can view related activities.

(2) The turbine flow meter itself is installed on the top, even if it can meet a certain length requirement, so after installation, full preparation must be made to ensure that the length of all pipes meets the needs of the original turbine flow meter.

(3) When installing the turbine flow meter, all installation points, upper and lower parts should remain concentric circles, and the error should be large enough.

It is best to install devices and facilities that can reduce vibration. The entire flow meter should not be installed on pipes with smaller vibrations, especially pipes with smaller lateral vibrations. If there is no way to place it, it is recommended to reduce the vibration device as much as possible, and it is best to add some shock-absorbing pads underneath.

(5) During the installation process of the turbine flow meter, attention should be paid to thoroughly screening the pressure point and temperature on the device. To meet the final measurement needs, all personnel should be installed basically near the flow meter and measure the pressure and temperature of the pipeline in this way. 

Get information

Doweston sensor data is being sent for free