New
ORP-D160 online ORP digital sensor/transmitter
(RS-485/ModbusRTU)
What you measure is what you get, with digital sensor technology, measurements are no longer erratic.
Powerful Modebus RTU/RS-485 transmission method, rich data carrying, and accurate measurement of every data!
● signal output: RS-485 ( Modbus/RTU protocol ).
● Conveniently connected to third-party devices such as PLC, DCS, industrial control computers, general controllers, paperless recording instruments or touch screens.
● Dual high-impedance differential amplifiers, strong anti-interference and fast response.
● ORP probe, the internal reference liquid seeps out from the microporous salt bridge extremely slowly under a pressure of at least 100KPa (1Bar), and its positive seepage lasts for more than 20 months. Such a reference system is very stable and the electrode life is doubled compared to ordinary industrial electrodes.
● Easy to install: 3/4NPT pipe thread, easy for submersible installation or installation in pipes and tanks.
● IP68 Protection rating.
Model | ORP-D160 |
Measuring range | -1500~+1500mV |
Resolution | 1mV |
Accuracy | ±6mV |
Operating Temperature | 0-65°C |
Working Pressure | <0.1MPa |
Power supply | 12~24VDC ±10% |
Signal Output | RS-485(Modbus/RTU) |
Wetted material | PPR |
Mounting Type | Submersible installation, 3/4NPT thread |
Cable length | 5 m; other lengths customizable |
Calibration method | A little calibration |
Power Consumption | <0.5W |
Protection Rating | IP68 |


Tell us about your measurement task and we will help with product selection and technical questions.info@doweston.com